|
Teleprompter Accessories
Prompter People Teleprompters are complete and ready to use without accessories, but most clients select accessories to adapt their teleprompter to use with their camera and environment. If you need any help choosing accessories, please give us a call
at (408) 866-9100.
| |
|
 |
|
 |
|
 |
The Wireless Remote is our most popular option. A receiver plugs into the USB port on your computer. The intuitive wireless handheld unit controls scroll speed, scroll direction, stop/start and cue points within a 50 foot range. The talent can use it to practice, or when taping on tighter shots. PC or Intel Mac compatible only.
REM-KEY |
|
Our solid aluminum wired controller gives precise rotary control over scroll speed and stop/start. It connects to your computer's USB port. A wired controller is preferred by dedicated prompter operators. Mac or PC compatible.
REM-GRF |
|
This heavy duty weighted pedal allows talent to control speed and start/stop the text scroll. The USB interfaced device uses no external electricity so there are no power cords or adapters needed. A sensitivity slider within Flip-Q allows precise control. PC compatible only.
REM-FOOT |
If you need software for more than one computer, there is a sliding scale to purchase multiple seats. Please call for a quote.
Smaller cameras may require a riser block to raise the camera up to the right height within the mirror frame. When ordering specify the camera for the correct riser if necessary.
| |
|
 |
|
 |
|
 |
| 1 1/2" Riser Block. |
|
3" Riser Block.
|
|
Riser Block for DV-11. |
| |
|
 |
|
 |
|
 |
Teleprompter systems with a 15 or 17” monitor come with a 5-foot VGA cable. DV9, DV11 and CNV10 prompters come with an 8-foot VGA cable that plugs into your laptop. If you would like to keep the computer out of the immediate prompting environment, you will need a VGA extension. Our 25-foot HD extension cable is $40. The 50-foot HD extension cable is $70 and must be used with a Distribution Amp (see next item).
C-VGA25 / C-VGA50 |
|
There are two uses for this device. It can be used to split the signal between two to four teleprompters from a single PC, or as a signal amplifier if you need to run 35 feet to 200 feet of VGA cable. It has four amplified outputs from one input. Don't forget the extra cable when ordering!
DA-VGA |
|
Side curtains are recommended only for use in high ambient light conditions, like outdoor light. They are not necessary in a normal studio environment. They attach quickly with Velcro.
CURT |
60/40 Glass Beamsplitter is the default reflector, included at no additional cost. High Brightness 50/50 Beamsplitter for extremely bright outdoor conditions is available for DV, 15” and 17” teleprompters, except Studio 17. Acrylic Beamsplitter is a specially coated acrylic used in conditions where breakage is a concern, like in schools.
| |
 |
|
 |
Load rating of 30 lbs. Includes set of legs, pro dual handled video head, quick release plate, sturdy carry bag. Weight 17 lbs.
TRI-HD |
|
Load rating of 15 lbs. Includes set of legs, pro handled video head, 2 quick release plates, sturdy carry bag. Weight 10 lbs.
TRI-MD |
| |
|
 |
|
 |
|
 |
These custom, foam padded, zippered cases are designed to protect your beamsplitter glass. 15/17P included
at no charge with CASE-BR and
CASE-U. 9/1P
Free with 9/11P-DV. |
|
Our custom designed carry case set has separate padded compartments for
each component of the Broadcast 15
or 17. Includes a free padded reflector
case. This is the ideal carrying case for
local travel. Carry your entire teleprompter in safety and style with this custom case.
NOTE: Universal model includes a
separate case for the base stand.
CASE-15/17P-B |
|
This case is designed with separate padded compartments to carry your DV9, DV11 or Convertible 10. Includes a free padded reflector case. This is the ideal carrying
case for local travel. Carry your entire teleprompter in safety and style with this custom case.
CASE-9/11P-DV |
| |
|
 |
|
 |
|
 |
This case with foam inserts was
designed for carrying our 9 to 11” DV
and Convertible teleprompters.
Not a flight case.
CASE-DVMD |
|
When a soft case doesn’t offer enough protection, and a flight case is more than
you need, our BMD wheeled carry case
will protect the components of your
Broadcast 15/17. This is the ideal
carrying case for local travel. It is not
a flight case. Carry your teleprompter
in safety and style.
CASE-BMD |
|
This heavy duty case on wheels will hold complete DV-9, DV-11 or Convertible 10,
or Broadcast 15 or 17 without sled. Size
is approximately 25x20x9 inches,
11 pounds. Comes with pick-and-pluck
foam so you can customize the case to
fit your needs. Can be custom configured
for an additional $179.
CASE-2700 |
| |
|
 |
|
 |
|
|
This heavy duty case on wheels holds a Broadcast 15 or 17, including sled. It is
also large enough for a Presidential pair (excluding poles and weights). Size is approximately 31x20x16, 22 lbs. Comes with pick-and-pluck foam so you can customize the case to fit your needs.
Can be custom configured for an
additional $179. We recommend
our FL-CASELS light stand bag for
the Presidential poles.
CASE-2975 |
|
This heavy duty case on wheels holds a Studio 17, including sled. Exterior size
is approximately 33x24.5x19 inches, 31
pounds. Comes with pick-and-pluck
foam so you can customize the case to
suit your needs. Can be custom
configured for an additional $179.
We recommend our FL-CASE-LS light
stand bag for the Presidential poles.
CASE-3075 |
|
Heavy-duty fabric bag will hold two Presidential stands.
FL-CASE-LS |
| |
|
 |
|
 |
|
 |
Some specialized applications require hardware reversal of the text. When a reversing monitor isn’t available, this is the answer.
VGA-REV |
|
Convert your Broadcast 15 or 17 to a Universal Model. Includes all mounting hardware and stand. Give yourself the option of both a tripod mounted and stand mounting system. Conversion takes just 5 minutes.
KIT-U
|
|
Convert your Universal 15 or 17 to a tripod mounted Broadcast teleprompter. Adds the freedom of unlimited panning and tilting. Conversion takes just 5 minutes. Requires heavy duty tripod.
KIT-BR |
| |
|
 |
|
 |
|
|
Used with the DV-9, this unit converts the 15 pin VGA output from the computer to a composite/ Svideo signal. It also includes a VGA pass-thru. This unit requires no external power since it receives its power from an available USB port.
AD-SC |
|
This 12VDC battery, charger and cable provides up to 2.5 hours run time for our 7.5 and 10.5 inch monitors, enabling shooter to work away from AC power sources.
DVBATT
|
|
|
In addition to our standard non-reversing monitors, we offer a composite /VGA reversing monitor. This monitor
accepts composite or VGA inputs and flips mirror-imaging electronically with a touch of a button. This allows
for the greatest flexibility for studio installs and is required for MOS compliant newsroom software use.
MON-CMP17U
MON-HB17U
The BR15, BR17, U15 and U17 are configured with a VGA monitor. This upgrade feature gives you an additional
composite input.
MON-VGACMPU
|
